Growlink Support

Hanging ESM1 Sensor Module

Locate the environment sensor(s) in a clean and dry location where it will sample non-stagnant air. If you are utilizing the light sensor for sun sensing, ensure the light sensor has a clear path to the sun or light source. The Environment sensor is designed to be suspended with the light sensor facing up and hanging at canopy level using the power cord and eye hook. The environment sensor can also be mounted to a wall with wall-mounting hardware. Run power to the environment sensor with the included power extension cord and adapter.

Read More

Dosing a Multi-Part Solution

If you have multiple peristaltic pumps, you can dose a multi-part solution in a defined ratio.

Read More

Adding a Peristaltic Pump

To add a Peristaltic Pump to your Nutrient Controller, simply plug it in. It will be recognized as much as 100 feet away with clear line of sight. If there are walls or other obstructions, the range may be more limited.

Read More

How to Change Wi-Fi Networks

To connect your Controller to a different Wi-Fi network other than the one it is currently configured for, press and hold the Setup button for approximately 15 seconds until the light flashes blue rapidly. (The Setup button is the Bottom button.) Release the Setup button and the light will start blinking blue. The Controller is back in Listening Mode.

Read More

Rules : Schedules

Scheduled rules are used to turn devices on and off based on a schedule. For example, you can have the lights turn on every day between 6:00 PM and 10:00 AM.

Read More

Rules : Timers

Timers are used to turn a device on and off on a regular basis. For example, you might want to turn on your irrigation system every ten minutes for five minutes. (On for five minutes, off for five minutes.)

Read More

Rules : Sensor Triggers

Sensor triggers are used to turn devices on and off based on sensor data readings. When a sensor value reaches a specified threshold, it will turn a device on. For example, you can set a trigger that will turn on the air conditioning when the temperature exceeds 85 degrees.

Read More

Rules : Alerts

Alerts are used to notify you when a sensor reading reaches a specified threshold. For example, you can receive notification any time the temperature exceeds 75 degrees.

Read More

Setting up Multiple Controllers

One account can manage multiple Growlink Controllers at one location. For each additional Controller, follow the same steps that you did to set up your first Controller.

Read More

Adding a Wireless Power Link

To connect a Wireless Power Link, simply plug it in. It will be recognized as far as 100 feet away with clear line of sight. If there are walls or other obstructions, the range may be more limited.

Read More

Subscribe to Support Articles Here!